UNISIGN · REPORT-MATCHED PVC BANNER SELECTION
Flame-Retardant PVC Banner Material
Choose a flame-retardant PVC banner by the exact model and report, not by a general product-family claim. B1 and NFPA 701 are different test routes. The required standard, banner model, report scope and printed condition must match the project.
A public UNISIGN SGS scan shows PVC COATED FABRICS tested to DIN 4102-1 with a B1 result. The visible page does not name a model or state the printed condition. Ask us to match the current full report to your quotation before approval.
Which PVC Banner Is Flame Retardant?
The correct answer is the exact model covered by an acceptable, current test report. A category name, model suffix, old scan or supplier statement is not enough. First ask the venue, buyer or authority which standard it accepts. Then match that requirement to the model code on the sample, quote and roll label.
For a B1 request, check the DIN 4102-1 report scope. For an NFPA 701 request, ask for the NFPA 701 report for the exact model. These two results should not be treated as equal or interchangeable.
What Public Evidence Is Available Now?
The public certificate area includes an SGS report scan. The visible page supports the facts below. It does not support a claim that every PVC banner or every current model has the same result.
| Evidence field | What the public scan shows | What still needs confirmation |
|---|---|---|
| Testing organization | SGS | Ask for the complete current report and all pages. |
| Sample description | PVC COATED FABRICS | Match this description to the exact ordered SKU and construction. |
| Standard | DIN 4102-1 (May 1998) | Confirm the buyer accepts this standard and edition. |
| Result shown | Meets class B1 | Confirm the result is within the full report scope and remains current for the order. |
| Report year | 2018 public scan | Request the latest available document. |
| Exact model on visible page | Not shown | Require a written report-to-SKU match. |
| Printed or unprinted condition | Not stated on the visible page | Check ink, print coverage, finishing and sample condition. |
B1 vs NFPA 701: Do Not Treat Them as the Same
| Buying point | B1 / DIN 4102-1 | NFPA 701 | What to ask |
|---|---|---|---|
| Test route | Classification under DIN 4102-1 for building materials. | Fire-test methods for flame propagation of textiles and films. | Which named standard and edition does the project require? |
| Common request | Often requested in Germany and some European projects. | Often requested for fabrics, films and hanging decorative materials in the United States. | Which local authority or venue reviews the document? |
| Can one replace the other? | No automatic equivalence. Acceptance depends on the project and authority. | Get written acceptance before production. | |
| What the report must match | Exact model, material build, test sample, report number, issuer, date and use condition. | Ask for the full report, not only a logo or first page. | |
| Printed condition | Printing, ink load, coating, seaming, hemming or other finishing may affect acceptance. | State whether the project needs printed-material evidence. | |
Primary definitions: DIN Media — DIN 4102-1 and NFPA — NFPA 701. The approving authority decides what is accepted for a project.
Exact Model and Report Matching Table
These are practical UNISIGN starting models for four banner uses. They are not listed here as certified models. The fire-report status must be checked for the exact model and order.
| Starting model | Banner type | Listed weight | Listed width | Print route | Fire-report status for this page |
|---|---|---|---|---|---|
| CFM11/510 | Coated frontlit, matte | 510 g/m² | Up to 5 m | Solvent, eco-solvent, UV, latex | Match required. Request the current report for this exact SKU. |
| LBG51/610 | Laminated backlit | 610 g/m² | Up to 5 m | Solvent, eco-solvent, UV, latex | Match required. Do not extend another model’s report to this SKU. |
| CDM2525/510 | Coated double-side blockout | 510 g/m² | Up to 5 m | Solvent, eco-solvent, UV, latex | Match required. Confirm both material build and printed condition. |
| M1212NP | Coated mesh with liner | 360 g/m² | Up to 5 m | Solvent, eco-solvent, UV, latex | Match required. Confirm liner, mesh build and exact report scope. |
4 PVC Banner Types to Start the Report Check
A product list with images helps a buyer identify the use, surface and model to sample. The image is a visual guide. The model code, current TDS, report, quotation and roll label control the order.
CFM11/510
- 510 g/m²
- Matte frontlit surface
- Up to 5 m listed
- Current fire report must match
LBG51/610
- 610 g/m²
- For illuminated display tests
- Up to 5 m listed
- Current fire report must match
CDM2525/510
- 510 g/m²
- Double-side blockout build
- Up to 5 m listed
- Current fire report must match
M1212NP
- 360 g/m²
- Coated mesh with liner
- Up to 5 m listed
- Current fire report must match
7 Steps Before You Approve a Flame-Retardant Banner
- Name the standardWrite B1 / DIN 4102-1, NFPA 701 or the exact local requirement.
- Name the authorityRecord the venue, buyer, inspector or authority that accepts the document.
- Lock the SKUUse the same model code on the sample, quote, report match and roll label.
- Read the full reportCheck issuer, number, date, method, sample description, result and limitations.
- Match the buildCheck weight, coating, liner, face, width and any other construction detail.
- State print statusSay whether the report must cover printed, unprinted or finished material.
- Get acceptanceSend the document pack to the approving party before bulk production.
What to Put in the RFQ
Required fire standard
State B1 / DIN 4102-1, NFPA 701 or another named standard. Add the required edition if known.
Banner type and build
List frontlit, backlit, blockout or mesh, plus target weight, width, roll length and model.
Printer and ink
Provide printer, ink family, print coverage and whether evidence is needed after printing.
Final construction
List welding, hems, eyelets, pole pockets, seams, liner removal and other finishing.
Venue and installation
State indoor or outdoor use, hanging method, display size, destination and approving party.
Quantity and deadline
Add sample quantity, production volume, delivery country and approval deadline.
Related PVC Banner Selection Tools
- PVC Banner Material Selector
- B1 vs NFPA 701 vs M1 guide
- PVC Banner Material range
- 4 Types of PVC Banner Material
Flame-Retardant PVC Banner FAQ
Is all PVC banner material flame retardant?
No. Do not apply one report or a general family statement to every model. Confirm the exact SKU, material build and report scope.
What is a B1 banner?
In this buying context, it means a banner model supported by an acceptable DIN 4102-1 result showing class B1. The report must match the ordered material.
Is B1 the same as NFPA 701?
No. They are different standards and test routes. A B1 report does not automatically prove NFPA 701 acceptance, and the reverse is also true.
Does UNISIGN have public B1 evidence for PVC banner?
Yes. A public SGS scan shows PVC COATED FABRICS tested to DIN 4102-1 with a B1 result. The visible page does not identify an exact SKU, so a current full report and written model match are still required.
Does this page prove that CFM11/510, LBG51/610, CDM2525/510 or M1212NP is certified?
No. They are starting models for a report check. Ask for the current report that covers the exact model before making a compliance claim.
Can a model name that contains “B1” be used as proof?
No. A model name is not a test report. Use the report number, issuer, date, sample description, method, result and written SKU match.
Does a report for unprinted banner also cover printed banner?
Do not assume this. Ask whether ink, print coverage and finishing are inside the report scope or accepted by the project authority.
What should I send for a report-matching request?
Send the required standard, authority or venue, exact model or banner type, weight, width, printer and ink, printed condition, finishing, quantity, destination and deadline.
Can UNISIGN guarantee approval by every venue?
No supplier can replace the final decision of the authority or venue. UNISIGN can provide the available document pack and product details for review.
Request a Model, Sample and Report Match
Tell us the standard, venue, banner type, print condition, width, ink, quantity and deadline. We will use those details to check the exact model and available documents.
Product information: UNISIGN · Reviewed September 16, 2026. Fire-test acceptance depends on the exact model, report scope, printed condition and approving authority. Request the current TDS and full report before ordering. About UNISIGN · Contact the PVC banner team.
Request a Flame-Retardant PVC Banner Match
Get Factory Price And Free Samples Right Now!
Just provide a few details and we will help you get quick quotes!
Or email info@unisignflex.com.